This fits your .
Name: Meditool Top-handle Jigsaw Kit, Variable Speed Electric Saw with 5.9FT Cord, Built-in Laser & Led Light, 45-Degree Max Mitre Angle Adjustable, Dust Extraction Connector, Parallel Guide, Two Blades Included
Basic Information:
Color: Yellow
Product Size: 8.6 x 2.7 x 8.2inch (L x W x H), Product Net Weight: about 5lb
Package Content: 1 x Jig Saw Kit
Attractive Advantage:
Cord Length: 5.9FT
Power Input: 800W
Voltage Frequency: 120v/230v, 50Hz
No Load Speed: 0-3000rpm
Stroke Length: 18mm
Max Cutting Depth: 1. wood: 80mm 2. steel: 6mm 3. aluminum: 10mm
Mitre Angle: 0 - 45 Degree
Built-in laser and led light, laser class: 2, wavelength: 635-680nm
Installation Steps (as manual shows in Page 6) :
STEP 1. Mounting saw blades ( the opening in the saw blade holder must be clean and free from saw dust) :
(1) Raise the guard; (2) Open the saw blade holder by unlocking the retaining collar; (3) Slide the saw blade up to the stop in the saw blade holder. Make sure that the back of the saw blade engages in the slot of the guide roller; (4) Close the saw blade holder by releasing the retaining collar; (5) Close the guard
STEP 2. Mounting the parallel guide ( the parallel guide allows sawing parallel to an edge at a max distance)
(1) Insert the parallel guide into the saw base; (2) Set the parallel guide to required distance and tighten the locking bolts.
STEP 3. Cutting of mitre angles ( the max mitre angle to the left/right is 45 degree.)
(1) Loosen the set screws with Allen Key placed within the case; (2) Tilt the shoe to the required mitre angle; (3) Tighten the set screws firmly.
Cleaning and Maintenance:
Regularly clean the ventilation slots.
If necessary clean the laser lens using a cotton bud soaked in alcohol. Do not use any other cleaning agents.
Meditool Top-handle Jig Saw Kit Variable Speed Electric Saw with 5.9FT Cord Built-in Laser & Led Light 45-Degree Max Mitre Angle Adjustable Dust Extraction Connector Parallel Guide Two Blades - B07BGXWKT8